The CZKS-6 Six Positions Plug Socket Switch Life Tester is according to the IEC 60884-1 Clause 20 and 21 (GB/T 2099.1 Clause 20 and 21), IEC 60669-1 Clause 18 and 19 (GB 16915.1 Clause 18 and 19) and IEC 61058-1 Clause 17 (GB/T 15092.1 Clause 17) to design and manufacture. It is suitable for the breaking capacity and normal operation life test of Plugs and socket-outlets for household and similar purposes. It is also applicable to switches for household and similar fixed electrical installations for making and breaking capacity, normal operation and endurance tests. The purpose is to evaluate whether the plug socket and switch can withstand mechanical damage and electrical fatigue destruction in normal operation, and whether there is any contact adhesion or long -term closed or disconnecting phenomenon. Checking whether it has excessive wear and other harmful consequences is a special equipment for the endurance test of plug sockets and switching electrical durability.

Standard:
IEC 60884-1 (GB/T 2099.1) „Wtyczki i gniazda wtykowe do użytku domowego i podobnego – Część 1: Wymagania ogólne” Klauzula 20 i 21
IEC 60669-1 (GB 16915.1) „Łączniki do domowych i podobnych stałych instalacji elektrycznych – Część 1: Wymagania ogólne” Klauzula 18 i 19
IEC 61058-1 (GB/T 15092.1) „Łączniki do urządzeń – Część 1: Wymagania ogólne” Klauzula 17

Specyfikacja:

Sugestie opcjonalne: When using LISUN CZKS-6 Six-Position Plug Socket Switch Life Tester, it is necessary to choose a LISUN LS-EU800W2-55L air compressor (power 800W*2, capacity 55L, speed 1380r/min, pressure 0.7Mpa, flow 120L/m in, 220~240V/50Hz) or LS-US800W2-55L air compressor (power 800W*2, capacity 55L, speed 1380r/min, pressure 0.7Mpa, flow 120L/min, 110~120V/60Hz).

Zastosowanie:
According to the corresponding standard requirements, the CZKS-6 Six-Position Plug Socket Switch Life Tester is equipped with the corresponding load cabinet, which can be used as a life test of plug-in sockets, buttons, switching switches, corset switches, push switching switches, rotating switches (can be customized):
- Typowe zastosowanie 1: CZKS-6 with Szafa obciążeniowa do testowania lamp fluorescencyjnych z zewnętrznym balastem DFX-20 (6 sets or 2 sets of DFX-20-3CH, can also be selected with 40A or 60A), you can perform the plug-in socket breaking capacity and normal operation test, which fully meets IEC 60884-1 Clause 20 and 21 (GB/T2099.1 Clause 20 and 21) test requirement.

- Typowe zastosowanie 2: CZKS-6 with Szafa obciążeniowa do testowania lamp fluorescencyjnych z zewnętrznym balastem DFX-20 (6 sets or 2 sets of DFX-20-3ch, can also be used with 40A or 60A), which can perform the endurance test of the normal operation of the switch, which fully meets the IEC 60669-1 Clause 19.1 and 19.2 (GB/ T16915.1 Clause 19.1 and 19.2) test requirement.

- Typowe zastosowanie 3: CZKS-6 with SBLL-3P20A Test for Switches Intended for Self-ballasted Loads (2 sets), which can perform the endurance test of the normal operation  of the switch, which is fully meet the IEC 60669-1 Clause 19.2 (GB/T16915.1 Clause19.3) test requirement.

- Typowe zastosowanie 4: CZKS-6 with Szafa ładująca lampy wolframowe/halogenowe DFX-WD20A (6 sets), which can perform the durability life test of the switching ability. It is fully meets the IEC 60669-1  Clause 18(GB/T16915.1 Clause 18) requirements.