{"id":2545,"date":"2025-06-19T19:36:57","date_gmt":"2025-06-19T11:36:57","guid":{"rendered":"https:\/\/www.ledphotometer.com\/blog\/imo-flame-spread-test-apparatus\/"},"modified":"2025-06-25T17:28:17","modified_gmt":"2025-06-25T09:28:17","slug":"imo-flame-spread-test-apparatus","status":"publish","type":"post","link":"https:\/\/www.ledtestinstrument.com\/id\/produk\/imo-flame-spread-test-apparatus\/","title":{"rendered":"IMO Flame Spread Test Apparatus"},"content":{"rendered":"
Lateral flame propagation properties for the determination of building products, flame propagation performance \/ flame spread rate of speed can evaluate the fire retardant properties of the material.<\/div>\n
\n

The device heats the sample through a gas radiation plate and calibrates it with a heat flux meter. <\/span><\/span><\/span>Test samples were placed in a vertical position, near the radiation plate, exposed in a clear area calibrated radiation flux. Close to the pilot flame test sample, but not in contact with the test sample, the sample was heated end ignited gas on the surface of the evaporator.<\/p>\n

After ignition, recording the development of the flame front, and record the flame front in a horizontal direction to reach the surface of the sample, combustion distance of each calibration elapsed time. Further testing materials include light heat, sustained combustion heat, critical flow, the average sustained burn calories, the total heat release and other relevant parameters.<\/p>\n<\/div>\n

Standar:<\/strong>
\n\u2022 ISO 5658-2:2006: reaction to fire test \u2013 Flame spread Part 2: Vertical distribution of building products side flame spread level.
\n\u2022 IMO FTP Code Resolution A. 653 (16): bulkhead, ceiling and deck material flammability test procedures Advice
\n\u2022 ASTM E1317:2019: Marine Surface Finishes Standard Test Method for Flammability
\n\u2022 ASTM E1321:2018\uff1a Standard Test Method for Determining Material Ignition and Flame Spread Properties<\/p>\n

Fitur:<\/strong>
\n\u2022 The cabinet is made of stainless steel, corrosion-resistant and beautiful and easy to clean; The main frame have two separate parts of the burner frame and the specimen support. framework. Two parts connected by bolts, and screws can be flexible mechanical adjustment.
\n\u2022 Ignition sources: radiation plate and imported a propane torch. Precise control of the flame height.
\n\u2022 Burner, (200 \u00b1 10) mm long holes ceramic tube.
\n\u2022 Cylinder type pilot burner flame support IMO standard automatic impact test (Optional)
\n\u2022 Double grid and an enlarged perspective mirror observe the flame spread , it is user-friendly.
\n\u2022 Radiation plate temperature controller: prevent flames turned the heat radiating plate rear side.
\n\u2022 Flow controller can easily test content of methane in the test gas flame heat.
\n\u2022 Gas supply: with a valve, zero-pressure valve, tempering valves, solenoid valves and a mixer, the mixed air and fuel gas supplied to the radiation plate.
\n\u2022 Providing a porous alignment plate and heat flow meter fixed on a sliding movement rail to detect heat flux if meet the standard requirements
\n\u2022 Equipped with an adjustable observation angle lens (750mm \u00d7 120mm), the test sample can rake through the glass mirror and observe the flame spread rate and by a foot switch, automatic record.
\n\u2022 Sample chimney equipped with compensating thermocouples.
\n\u2022 All radiant panel combustion control system safety explosion-proof, check valve, cut off the gas solenoid valve prevents the gas reflux.
\n\u2022 The camera can observe a situation and save the test program (Optional)
\n\u2022 Measuring heat flow state within the range of the radiation plate for 50mm.
\n\u2022 Data acquisition system can store the image length flame spread and combustion characteristics.
\n\u2022 19 \u201crack to measure the flame spread rate analysis, critical flow, heat release rate.
\n\u2022 Radiation plate burner system is fully automated, with spark ignition and safety protect system.
\n\u2022 IMO program so that all calibration, test results print (IMO, ISO) easier (Optional)<\/p>\n

Spesifikasi:<\/strong><\/p>\n\n\n\n\n\n\n\n
\u00a0Size<\/td>\n1,710(W)\u00d71,100(D)\u00d71,985(H)mm<\/td>\n<\/tr>\n
Daya<\/td>\nAC 220V, 50\/60Hz, 30A<\/td>\n<\/tr>\n
Berat<\/td>\n200kg<\/td>\n<\/tr>\n
\u00a0Exhaust<\/td>\nMinimum 30m2\u00a0\/ min<\/td>\n<\/tr>\n
Other requirements<\/td>\nMethane, PC, compressed gas, camcorders<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
\n

\"\"<\/p>\n

Equipment on testing<\/span><\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"

Lateral flame propagation properties for the determination of building products, flame propagation performance \/ flame spread rate of speed can evaluate the fire retardant properties of the material. The device heats the sample through a gas radiation plate and calibrates it with a heat flux meter. Test samples were placed in a vertical position, near […]<\/p>\n","protected":false},"author":1,"featured_media":3512,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6],"tags":[298],"class_list":["post-2545","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-products","tag-ls-iso5658-2"],"_links":{"self":[{"href":"https:\/\/www.ledtestinstrument.com\/id\/wp-json\/wp\/v2\/posts\/2545","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.ledtestinstrument.com\/id\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.ledtestinstrument.com\/id\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.ledtestinstrument.com\/id\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.ledtestinstrument.com\/id\/wp-json\/wp\/v2\/comments?post=2545"}],"version-history":[{"count":0,"href":"https:\/\/www.ledtestinstrument.com\/id\/wp-json\/wp\/v2\/posts\/2545\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.ledtestinstrument.com\/id\/wp-json\/wp\/v2\/media\/3512"}],"wp:attachment":[{"href":"https:\/\/www.ledtestinstrument.com\/id\/wp-json\/wp\/v2\/media?parent=2545"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.ledtestinstrument.com\/id\/wp-json\/wp\/v2\/categories?post=2545"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.ledtestinstrument.com\/id\/wp-json\/wp\/v2\/tags?post=2545"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}