Meets IECCSA & UL requirements Test Probe 13 of Short Test Pin – Fig. 9 of EN 61032.

This Test Probe Pins (Figure 9 – Test probe 13 of IEC61032) is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment (see IEC60536).

Conforms to:
Standard IEC61032, IEC60065, IEC60335-1, IEC60950, IEC60601, IEC60745 and UL etc.

Parámetros técnicos:
Diámetro de la sonda: 3 mm
Longitud de la sonda: 15 mm
Espesor de la placa deflectora 4 mm
Diámetro del deflector: 25 mm
Longitud del mango: 20 mm
Diámetro del mango: 10 mm

Estándar:
IEC 61032 “Protection of persons and equipment by enclosures – Probes for verification
IEC 60065 "Aparatos de audio, vídeo y aparatos electrónicos análogos - Requisitos de seguridad"
IEC 60335 “Household and similar electrical appliances – Safety – Part 1: General requirements”
IEC 60950-1 “Information technology equipment – Safety – Part 1: General requirements”
IEC 60601 “Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 1: General requirements”
IEC 60745 “Hand-held motor-operated electric tools – Safety – Part 1: General requirements”